You are in :

News 2023

Progress Profiles will be proud to show you the new products and systems, developed with the best technologies and design unmistakably Made in Italy.

Constant research has led us to increasingly performing solutions and among the innovations you will also discover the new finishes, always in line with the latest trends.

 


 

 

PRODESO® DRAIN 4 SYSTEM


PRODESO® DRAIN 4 is a uncoupling membrane which creates an “air chamber” below the floor favoring the the drainage of the water and the micro-ventilation. This “air chamber” guarantees a fast and smooth drying of the adhesive, even in case of large size tiles, and reduces significantly efflorescence formation and triacetate rising in joints. The uncoupling and vapour management properties of PRODESO® DRAIN 4 guarantees the laying even in not perfectly cured supports. Easy and quick to install, PRODESO® DRAIN 4 has an overall thickness of only 4 mm.

     
 

PRODESO® DRAIN 8 SYSTEM


 

PRODESO® DRAIN 8 is a patented membrane, for drainage, uncoupling and waterproofing, with a total thickness of 8 mm, which can be installed even on not perfectly cured screeds. The “air chamber” below the pavement drains the water that infiltrated below it, helps a quick drying of the adhesive and effectively reduces the rise of triacetates and the appearance of efflorescence. The system, ideal for a correct laying on terraces and balconies even of large slabs, is completed with a band of polyethylene and elastic polypropylene and with a twocomponent waterproofing adhesive. Quick and easy to install, PRODESO® DRAIN 8 is very versatile and guarantees long life for outdoor flooring.

     
 

PRODESO® HEAT GRIP 5 / STICK SYSTEM


 

The electric wall and floor heating system PRODESO® HEAT GRIP 5 SYSTEM, designed, manufactured and patented by Progress Profiles, is an innovative system that allows you to quickly and cheaply obtain a pleasantly warm and extremely comfortable environment. The system can be installed using normal cement adhesives and thanks to its decoupling and waterproofing properties can be applied on cracked supports and still in the phase of hygrometric withdrawal. Thanks to the latest generation wi-fi thermostat, the system can be programmed daily even remotely and this allows you to optimize comfort and reduce consumption. Easy and quick to install in any environment, it has an overall thickness, including the adhesive, of only 7 mm and requires no maintenance over time. *Also available in self-adhesive version PRODESO®‍ HEAT GRIP 5 STICK SYSTEM.

     
 

PRODESO® HEAT GRIP 8 SYSTEM


The system consists of three elements: PRODESO® HEAT GRIP 8 MEMBRANE, PRODESO® HEAT GRIP 8 CABLE and PRODESO. HEAT GRIP 8 THERMOSTAT KIT. The polyethylene membrane, with uncoupling, waterproofing and vapour management features, has a thickness of only 8.5 mm and is provided below with a non-woven heat-sealed fabric of polypropylene that ensures the attachment to the support. The new geometry of the membrane, in addition to ensuring a perfect anchoring of the heating cable, ensures a very high tear resistance. The latest generation cables consist of electrical resistances, 60 cm long, in series. If the cable is damaged, the damaged resistance stops working and not all the cable. The thermostat, of the latest generation, interfaces with Android and Apple devices; this allows you to program all its adjustments and settings even remotely using a WiFi network.

     
 

PRODESO® ECO / ECO STICK SYSTEM


PRODESO®  ECO is an uncoupling membrane, which allows vapour management and heat distribution with only 4 mm thickness. It is composed of a polyethylene sheet, with square base truncated pyramid cavities, to which is heat-sealed a polypropylene non-woven fabric that ensures the membrane is bonded to the support. The uncoupling and vapour management features of PRODESO ECO allow it to be laid even on not perfectly cured substrates. Also available in self-adhesive version PRODESO® ECO STICK.

     
 

PROLEVELING KIT

Tile levelling system kit with spacers for levelling tiles, provided in a practical PVC bucket, for a coplanar and equidistant pose.

The kit consists of 4 elements: limear levellers, "T" levellers, tie rods for leveller and unscrewer for tie rod.


 

PROLEVELING WEDGE KIT

Tile levelling system kit with spacers for levelling tiles, provided in a practical PVC bucket, for a coplanar and equidistant pose.

The kit consists of 3 elements: levelling wedge, linear leveller and clamp.

     
   

KIT PROSUPPORT TUBE


 

The new complete PROSUPPORT TUBE SYSTEM KITS will be available in packs of 20 pcs. The kits contain all the necessary components: Base, Screw, Head 2 or 4 mm and anti-noise and anti-slip rubber. A first kit of variable height from 34 mm to 54 mm and a second kit of variable height from 54 mm to 74 mm. The kits are compatible with all accessories of the PROSUPPORT TUBE line.

     
 

ANGULAR JUNCTIONS OF PROTERRACE DOUBLE DRIP


 

New and unique, with angular junction PROTERRACE DOUBLE DRIP are made simple, economical and elegant angles. Technology at the service of design.

 

     
 

END CAPS OF PROTERRACE DOUBLE DRIP


 

The end caps of the profiles PROTERRACE DOUBLE DRIP, simple, innovative and functional, prevent water flow on the wall and complete in an elegant way the profile.

 

     
 

ANGULAR JUNCTIONS OF PROTERRACE ECO DRIP


 

Innovative and unique, the new angular junction PROTERRACE ECO DRIP, allows you to make simple, economical and elegant angles. Technology at the service of design.

     
 

PROTERRACE DOUBLE DRIP is an edging profile in varnished aluminium, designed to protect the edges of the tiles on terraces and balconies and to allow the downflow of water. The profile is provided with a flange that ensures the right fixing and an adhesive stripe, which protect the outflow holes to be closed by silicone. The double drip allows the drainage water to flow out in case of application with PRODESO® DRAIN draining membrane. To reach a right connection between profile and the waterproofing system it’s needed to use PROBAND 150 with PROBAND KOLL/AB.

     

BLACK LINE matt black finish, is also available for the drain grid PROSHOWER DESIGN PRO and for PROSHELF steel shelves. The black that furnishes.

 

     
PROSHOWER PROFILE - Black Line   PROSHELF ACC  - Black Line   PROSHELF INS ALL - Black Line   PROSHOWER TOP DESIGN - Black Line

 

     
PROJOLLY SQUARE - Black Line   PROTERMINAL  - Black Line   PROJOLLY QUART - Black Line   PROLISTEL CHANNEL - Black Line

 


 

 

PROSHOWER PROFILE ALL - Stone Line


The innovative slope profile for showers flush to the floor PROSHOWER PROFILE ALUMINIUM, can be used in any shower, is available in all STONE LINE finishes.

     
 

PROSHELF INS ALL - Stone Line


The new PROSHELF INS aluminium shower shelf, available Design and Line versions and easy to install after laying the ceramics, combines in any environment thanks to the variety of colours available.

 

     
 

PROSHELF INS ACC


 

The new PROSHELF INS ACC shower shelf in stainless steel 316, easy to install after ceramic laying, it is available in Design and Line versions.

 


 

 

 

PROSHOWER BASE L PRO


 

PROSHOWER BASE L PRO is a stainless steel drain AISI 316L / 1.4404 - V4A molded for the realization of floor and wall showers, available in different lengths and equipped with different grids. The grid, thanks to the supports of the kit, can be placed flush with the floor or have a height up to 24 mm. Thanks to its 360º adjustable siphon and its low thickness of only 66 mm it is a very sought-after solution.

     
   
PROSHOWER TOP TILE PRO   PROSHOWER TOP LINE PRO   PROSHOWER TOP DESIGN PRO

 

 

WALL DRAIN BOX


 

PROSHOWER BASE PRO is equipped with a tank for WALL DRAIN made of stainless steel AISI 316L / 1.4404 - V4A, which is recessed into the wall and allows discharge wall-mounted without compromising the flow and easy cleaning.

     
  PROSHOWER DRAIN CENTRAL PRO

PROSHOWER DRAIN CENTRAL PRO is stainless steel AISI 316L / 1.4404 - V4A molded drain for the realization of floor showers, with size 10 x 10 cm. The grid, thanks to the supports in the kit, can be placed flush with the floor or reach heights up to 24 mm. Thanks to its 360º adjustable siphon and its low thickness of only 63 mm it is a very sought-after solution.

 

PROJOLLY SQUARE - Grey Gun

   

Anodized Silver Grey Gun

 

Polished Chrome Grey Gun

 

Brushed Polished Grey Gun


 

PROTERMINAL - Grey Gun

   
Anodized Silver Grey Gun   Polished Chrome Grey Gun   Brushed Polished Grey Gun

 

PROJOLLY QUART - Grey Gun

   
Anodized Silver Grey Gun   Polished Chrome Grey Gun   Brushed Polished Grey Gun

 

PROINTER JOINTS

   

 

     

PROSCREW

 

 

Innovative profile system for laying LVT and SPC flooring 4.5 to 7mm thick. The fixing system with self-tapping screw, guarantees an extreme ease of installation and a high strength. Perfect for installation on large commercial surfaces.

PROSCREW 62   PROSCREW 74   ALUMINIUM BASE    

 

 

PROENTRANCE MATT SYSTEM


PROENTRANCE MATT SYSTEM is an entrance mat, made of aluminium guides and joined by a PVC joint. It is an effective barrier to retain dust, moisture and dirt. The strong materials used and the modern design ensure a high durability, significantly reduce the possibility of slipping. Suitable for environments subject to heavy pedestrian traffic such as airports, hotels, offices, shopping centers, shops, leisure places. Available in 4 heights: 10, 13, 17 and 22 mm.

     
 

PROENTRANCE MATT SLIM SYSTEM


PROENTRANCE MATT SLIM SYSTEM is an entrance mat with raw aluminium structure glued on a polyethylene terephthalate (PET) mat. It constitutes a real barrier to cleaning: it ensures optimal protection and the permanence of soils subjected to intense traffic: pedestrians, supermarket trolleys and shopping centers. Lightweight, easy to handle and easy to maintain, it is installed on the back or in a recessed position, inside or outside under shelter (as an entrance airlock).