Projolly square

A right angle profile for protecting the outside corners of wall coverings, edging wall coverings and decoration.

Select finish

POLISHED, SUPER POLISHED, SANDED AND BRUSHED STAINLESS STEEL AISI 304/1.4301-V2A

POLISHED, BRUSHED STAINLESS STEEL AISI 316LL/1.4404-V4A

CHROMED BRASS, BRUSHED AND ANTIQUE BRASS

ANODISED and POLISHED ALUMINIUM

Brushed aluminium, tiltexand varnished aluminium

ALUMINIUM STONE LINE, VARNISHED ALUMINIUM AND TUSCANY LINE

IMPACT-RESISTANCE NON-TOXIC VINYL RESIN(PVC) COLOURED – UV RESISTANT

POLISHED, SUPER POLISHED, SANDED AND BRUSHED STAINLESS STEEL AISI 304/1.4301-V2A

PROJOLLY SQUARE is a square corner bead profile in polished, super polished, sanded, brushed stainless steel AISI 304/1.4301-V2A that can be applied on external corners of coverings. It can be used to close the perimeter of coverings, like a connection profile between step tread and riser of stairs coated with ceramic and natural stone tiles, and also as separation profile for floor and wall coverings. Its particular section, the availability in three different finishes and special pieces such as internal and external corners, end caps and joints make PROJOLLY SQUARE a much sought-after profile that allows a workmanlike application even in environments subject to high mechanical stresses.

Download catalogue Download technical Data sheet

POLISHED STAINLESS STEEL AISI 304/1.4301-V2A with protective film - bar length 2,7 LM - packaging 40 Pcs - 108 LM (H: 12,5 - 15 mm 54 LM) - 8/10mm
- ARTICLEH (mm)COLORSECTION
- PJQSAC 0454,5
- PJQSAC 066
- PJQSAC 088
- PJQSAC 1010
- PJQSAC 1111
- PJQSAC 12512,5
- PJQSAC 1515
SATINED STAINLESS STEEL AISI 304/1.4301-V2A thermo packed bar length 2,7 LM - packaging 40 Pcs - 108 LM (H: 12,5 - 15 mm 54 LM) - 8/10mm
- ARTICLEH (mm)COLORSECTION
- PJQSACS 0454,5
- PJQSACS 066
- PJQSACS 088
- PJQSACS 1010
- PJQSACS 1111
- PJQSACS 12512,5
- PJQSACS 1515
SUPER POLISHED STAINLESS STEEL AISI 304/1.4301-V2A thermo packed bar length 2,7 LM - pack. 20 Pcs - 54 LM - 8/10mm
- ARTICLEH (mm)COLORSECTION
- PJQSACML 045
  Mirror Line4,5
- PJQSACML 06
  Mirror Line6
- PJQSACML 08
  Mirror Line8
- PJQSACML 10
  Mirror Line10
- PJQSACML 11
  Mirror Line11
- PJQSACML 125
  Mirror Line12,5
- PJQSACML 15
  Mirror Line15
SANDED STAINLESS STEEL AISI 304/1.4301-V2A with protective film bar length 2,7 lm - Pack 20 Pcs - 54 lm - 8/10 mm
- ARTICLEH (mm)COLORSECTION
- PJQSACSB 077
- PJQSACSB 088
- PJQSACSB 099
- PJQSACSB 1010
- PJQSACSB 12512,5

Laying examples

1. Choose PROJOLLY SQUARE according to the tile thickness and desired finish. 2. Cut PROJOLLY SQUARE to the desired length and apply the adhesive on the support where the profile will be laid.
3. Press the anchoring flange of PROJOLLY SQUARE into the adhesive. 4. Lay the tiles, aligning them with the profile leaving a 2 mm joint. Remove immediately all remains of adhesive from the surface of the profile. 5. Fill the joints between the profile and the tiles with grout, in order to avoid water stagnation. Remove immediately all the remains of grout from the surface of the profile.

Projolly square

Select finish

POLISHED, SUPER POLISHED, SANDED AND BRUSHED STAINLESS STEEL AISI 304/1.4301-V2A

Laying examples

Available colours

Gallery

Laying video